15ppm BILGE ALARM FOCAS-2000
Product Description
Thank you for reading this post, don't forget to subscribe!- This product adopts an automatic operation method using sample water pressure which is matched to theoperation of an oil separator or pump.
- The automatic washing function of the detection unit can reduce troublesome manual washing work.
- An error code indication provided at occurrence of a device fault and a stain indication of the detection unitfacilitate maintenance and inspection. The product has a high-maintainability structure.
- Operation records such as trouble alarms can be saved in a memory card and confirmed as required.
- For alarms, a double safety method is used. When the oil concentration is 15 ppm or more,and When sample water is defective or the instrument is defective, a alarm is output.
- Replacement of detecting part (sensor) separately sold can be accepted. as the completion of every fiveyears calibration
Specifications
- Fellow Kogyo FOCAS-2000 15 ppm Bilge Alarm:
- Measurement method: Optical continuous measurement
- Operation method: Automatic operation using sample water pressure
- Response time: Within 5 seconds
- Power supply: AC90 ～ 240 V 50 ～ 60 Hz, 20 VA or less
- Error! Filename not specified.
- Measurement range: 30 ppm in full scale
- Measurement accuracy: Within ±5 ppm at 15 ppm
- Sample water conditions: Pressure: 0.03 ～ 0.3 MPa, flow rate: 0.2 ～ 3 L/min, water temperature: +2 ～ +45°C
- Clean water pressure for washing: 0.03 ～ 0.6 MPa
- Material measured and identified: Light oil 10 ppm in 100 ppm iron oxide solution
- Battery for clock and lifetime: Lithium battery (CR2450) about 2 years
- Service temperature and humidity: 0 ～ 50°C, 5 ～ 90％RH, no dew condensation
- Maximum measurement angle of inclination: Within 22.5° in each direction
The FOCAS-2000 is a maritime device that monitors oil content in bilge water to ensure compliance with environmental regulations. It uses a full optical continuous measuring method to provide real-time monitoring