Smart Bilge 15ppm Oil Content Monitor
The SMART BILGE 15ppm Oil Content Monitor was developed in 2005 to meet and exceed the requirements for MEPC.107(49) regulations. The SMART BILGE is made up of 2 key components, the SMART BILGE ‘Module’ and the SMART ‘CELL’ measuring cell. The SMART CELL utilises a unique Detector Array Technology, developed by Rivertrace, allowing the OCM to analyse all three oil types (HFO, Diesel and Emulsions) simultaneously without the need for re-calibration. This innovative design allows for simple routine maintenance of the OCM while maintaining optimal conditions.
Thank you for reading this post, don't forget to subscribe!| Measurement | |
| Oil types: | HFO, Diesel and Mixture C (IMO defined) |
| Clean water calibration: | +/- 2ppm of factory set values |
| Oil range: | 0 – 40 ppm |
| Accuracy oil + solids: | +/- 5ppm up to 30 ppm |
| Solids discrimination: | 100ppm Iron Oxide in 10 ppm Diesel |
| Response time: | < 5 sec (oil reading) |
| Alarms | |
| Oil alarm 1 setpoint: | 1 – 15 ppm user adjustable |
| Oil alarm 2 setpoint: | 1 – 15 ppm user adjustable |
| Oil alarm 1 delay: | 0 – 5 seconds user adjustable |
| Oil alarm 2 delay: | 0 – 600 seconds user adjustable |
| Input / output | |
| Analogue output: | Active 4-20mA / 0 – 20mA |
| Switch inputs: | 2 x switch inputs for separator and backflush status |
| Data storage and retrieval | |
| Calibrate on data storage: | Stored in cell |
| IMO required data: | Stored in Control enclosure |
| IMO required data retrieval: | Via LCD display, RS 232 comms link or USB |
| System and supply | |
| Supply voltage: | 115 or 230V AC, 50 – 60Hz |
| Supply voltage Consumption: | < 50 VA incl. solenoid valve |
| Supply voltage tolerance: | +/- 15% |
| Projected life: | > 50,000 hrs |
| Protection class: | IP 65 |
| Approvals: | MEPC 107(49) – DNV-GL, USCG, CCS, , Russian Register, Transport Canada. |
| Weight: | 3.2 Kg / 7.05lb |