Tanktech UTI Meter
Gas-tight Type Portable Oil / Water Interface Detector for Ullage, oil / water interface & temperature gauging
Thank you for reading this post, don't forget to subscribe!GENERAL
Tankers shall be provided with an effective oil/water interface detectors approved by
And this device shall be provided for a rapid and accurate determination of the oil/water interface in slop tanks and shall be available for use in other tanks where the separation of oil and water is effected and from which it is intended to discharge effluent direct to the sea.
This device should be tested according to the IMO Resolution MEPC 5, (XIII) for the prevention of pollution from ships.
SPECIFICATION
| Accuracy of ullage, interface detection | +1 – 2 mm |
| Indication of level divided by ullage and interface | Visible and Audible |
| Tape length | 15 M / 30 M / 40 M |
| Tape graduation | Metric |
| Tape resolution | 1 mm |
| Tape accuracy | +/ -3.2 mm |
| Diameter of probe | 23 mm |
| Minimum detectable level | 10 mm |
| Ambient temperature range | -20° C to 70° C |
| Temperature sensor measurement range | -20 ° Cto 110° C |
| Temperature measurement resolution | 0.1° C |
| Accuracy over calibration range | +1-0.2°C (0ºCto 70°C) |
| Temperature reading mode | °C(Celsius |
| LCD display | 2 Line 16 character |
| Top Coupling | PF 2-1/4″ TAP |
| Weight | 7.4 kg |
| Overall dimensions (H X W X T) | 710 X 346X 199 mm |
| Battery | 9 Volt (Model : MN1604) |
SPECIFICATION
Intrinsically safe type
MATERIAL Body : Aluminum casting (JIS – AC4C-T6)
COATING In/Out : Epoxy nylon coating
Color : Black
Thickness : (In / Out Side ) 50mic.
Ex ia lIB