Rivertrace Smart ODME SMART ODME – Oil Discharge

  • The Oil Discharge Monitoring Equipment (Smart ODME) has been designed to provide means of monitoring, recording and controlling the ballast discharge for crude oil, product and chemical tankers including ICE class vessels.
  • This system is modular in construction and does not require the usual pump/motor bulkhead penetration as used on older systems. The Smart ODME includes all components required to meet MEPC 108(49) and the latest MEPC 240(65) for Bio Fuels, effective 1 January 2016.
  • The Smart ODME incorporates a ‘simulation mode’ to aid system demonstration to PSC surveyors, is designed for ease of retrofitting, operation, installation and maintenance.
  • Discharge limits are set at 30 litres of Oil per nautical mile or 1 / 30,000 of the previous cargo for slop and wash water discharges.
  • Key Features
  • The SMART ODME has been Biofuel Approved in accordance with MEPC.240(65)
  • The system has been designed for an easy installation at the yard with only one flow meter and one sample point
  • Minimal bulkhead penetration with motor and pump in one location.
  • Paddle wheel flow sensor making for simple installation and maintenance
  • Calibration Check Kits available for functional testing
  • Fleet Deals – Frame Agreements & Exchange Scheme

Applications

Thank you for reading this post, don't forget to subscribe!
  • Slop Water Discharge
  • Tank Wash Water Discharge
  • Clean Ballast Water Discharge
  • Rivertrace Smart ODME (Oil Discharge Monitoring Equipment) typically has the following specifications:
  • Supply Voltage: 115/230V AC, 50-60Hz (switchable)
  • Zener Barrier/Computer Module Voltage:115/230V AC, 50-60Hz (switchable)
  • Motor Voltage: 380-440V AC, 50-60Hz, 3 phase, 250W
  • Power Consumption: Less than 50 VA single phase
  • Key points about the Rivertrace Smart ODME:
  • Compliance: Meets IMO MEPC 108(49) and MEPC 240(65) regulations for oil discharge monitoring
  • Measurement capabilities: Monitors oil content in discharged bilge water, allowing for automatic control of discharge based on preset limits
  • Data recording: Stores oil concentration, alarms, and fault logs for reporting purposes
  • Remote access: Can be accessed remotely via LAN or USB for data download and diagnostics
Back to Product Page